#Recorder 2 4k feeds 1080p

Lastly, we know that respecting all these requirements will not be easy with a tight budget, and thus we have already thought of downgrading the resolution to 1440p or 1080p (which might be mandatory anyway considering the Nano cannot encode two feeds at the same time, as we saw in the datasheet). For instance, we thought of using NVRs, but these seem a bit over our budget. Video settings: + Encode your videos using the H.264 or JPEG codec + Save your videos as. Enable Airplay Mirroring and stream the camera’s live feed and your recorded videos over the air. Recording to an external media over ethernet (we know the Jetson supports Gigabit ethernet, but we are concerned with the receiving-end media, which might get flooded with data if all 8 jetson’s shoot 1GB/s)Īre there other ways to store the frames that we have not thought of? Bear in mind that we have a limited budget. Why do you keep recording 1080p videos whereas you could capture 2160p ones 4K Recorder is pushing the limits of your iPhone and iPad Air 2.

Recording to an SD card (if the write speed allows it, what would be the required size for the card?) So lock in your exposure, then add as much physical light as possible, then add gain if its still too dark - in that order.This being said, we are having difficulty to estimate the size of a frame (after it has been encoded), and thus we are having difficulty to evaluate the feasability of: Play back HLG and HDR10 or record HDR HDR10 and HLG in single-channel. Design and manufacture high quality products with 30 R&D engineers. All products provide two or three years warranty. 4K HDMI and 12G-SDI Inputs/Outputs 1500 cd/m² Brightness HDR Mode with 10-Stop Dynamic Range High Bright Mode for Rec. Also, it is worth mentionning that we must use a lossless encoding (for pixel matching later on in the 3D reconstruction). Record up to four channels of HD, or record/play back one channel of 4K/UHD/2K/HD. VC12-4K-4K HDMI PCIE Capture Card VC12-4K-4K HDMI PCIE Capture Card, USB/PCIE Capture. Considering our system has no real-time requirement, what would be the most adequate way of storing/recording theses two 4k feed to a file? Note that the recording of each camera will be approximately 30 seconds (the complete system will have around 16 cameras, connected to 8 Jetson). This camera outputs a feed in a raw NV12 format.

Recorder 2 4k feeds